On the Motorola XTS-1500/XTS-2500 (portable) for public works / government:

XTS 1500 Model 1.5On models with a screen and no keypad:

1. On the left side of the radio, there is a purple button above the Push-To-Talk (PTT) button. Press and hold the purple side button until a tone is heard and a flashing square icon is seen on the upper left of the screen, indicating program mode.

2. Navigate to a talkgroup you wish to add or remove from your scan list

3. Press the purple button on the side of the radio to select and add to the list (indicated by the zig-zag scan icon) or deselect (removing the icon)

4. Navigate to each additional talkgroup and repeat step 3

5. When finished, turn the radio off and on again

On models with a screen and keypad:XTS 2500 Model 2 and 3

1. Press the right side of the four-way navigation button until PROG is displayed

2. Press the button directly below PROG
You’ll see the menu has changed to show what lists you are able to edit. You should see SCAN.

3. Press the button directly below SCAN
You’ll see a flashing square in the upper left corner, indicating program mode.

4. Navigate to a talkgroup you wish to add or remove from your scan list

5. Press the button directly below SEL to select (indicated by the zig-zag scan icon) or deselect (removing the icon)

6. When you’re finished, press the Home button